Zoom ZDM-1 Podcast Mic Pack with Headphones, Windscreen, XLR, and Tabletop Stand

Zoom ZDM-1 Podcast Mic Pack with Headphones, Windscreen, XLR, and Tabletop Stand

RECOMMENDED ACCESSORIES

Zoom ZDM-1PMP Overview

A perfect companion for the PodTrak P4 podcast recorder, the Zoom ZDM-1 Podcast Mic Pack bundles all the essentials you'll need to complete your home or mobile podcasting studio—a microphone, headphones, a tabletop mic stand, a mic cable, and more.

The Zoom ZDM-1 dynamic mic and its custom windscreen help you record your voice with full, broadcast-quality tone and minimal noise from breaths and room ambience while the ZHP-1 closed-back headphones ensure transparent audio reproduction for critical listening. For simple and convenient setup of the mic, the ZDM-1 Podcast Mic Pack also includes an XLR mic cable and a tabletop tripod stand.

Zoom ZDM-1 Dynamic Microphone

Tuned to deliver a robust vocal tone with smooth highs and tight lows, the Zoom ZDM-1 is an affordable dynamic microphone that's ideal for podcasters, radio show announcers, rappers, and singers. Thanks to its high SPL handling and broad frequency response, this end-address mic makes it easy to capture your voice with mix-ready broadcast quality.

The large-diaphragm dynamic capsule utilizes a supercardioid pickup pattern to effectively reduce ambient sound such as room noise at the sides of the mic. To isolate the pickup element from handling noise, vibrations, and rumble, the ZDM-1 employs an integrated shock-absorbing mechanism. The ZDM-1's integral humbucking circuit improves the signal-to-noise ratio by inhibiting electromagnetic interference from common sources such as wireless devices, power lines, computer displays, and more.

The all-metal body and grille afford ruggedness and durability for reliable use session after session. The ZDM-1 includes a pivoting mic stand mount for easy positioning and a custom windscreen for attenuation of plosives and breath noise.

  • Large-diaphragm dynamic design captures smooth, broadcast-quality sound
  • Classic end-address style
  • Supercardioid polar pattern provides focused pickup and excellent isolation
  • High 135 dB SPL handling ensures clean recordings every time
  • 50 Hz to 18 kHz frequency response with tight bass and smooth highs enhances vocal tone for radio, podcasting, and more
  • Internal shockmount provides isolation from bumps and handling noise
  • Built-in humbucking circuit rejects electromagnetic interference
  • Balanced XLR output connector
  • All-metal body and grille stands up to daily use
  • Includes pivoting mic stand mount, threaded adapter, and custom windscreen

Zoom ZHP-1 Over-Ear, Closed-Back Headphones

The Zoom ZHP-1 are over-ear headphones designed to deliver a neutral, transparent sound for music tracking, editing, and mixing applications, location recording, and monitoring film sound on set. The 40mm neodymium dynamic drivers provide high sensitivity and a wide frequency response of 10 Hz to 20 kHz while the closed-back design enhances acoustic isolation.

Thanks to the self-adjusting headband and replaceable leatherette earpads, the ZHP-1 offer comfort and a fit that accommodates a variety of head sizes. The earcups are rotatable to allow easy single-ear monitoring for vocal sessions and quick signal checks.

The detachable single-sided cable is terminated with a 3.5mm TRS mini plug for compatibility with mobile devices and portable audio recorders, and a 1/4" adapter is included for hookup to audio interfaces, headphone amps, and mixers.

High-sensitivity neodymium dynamic drivers provide a neutral, transparent sound and a frequency response of 10 Hz to 20 kHz

Self-adjusting headband and leatherette earpads ensure comfortable wearing and help your ears stay cool and dry

Over-ear, closed-back design prevents sound from your headphones bleeding into your microphone, keeping noise out so you can critically focus on editing and mixing

Long single-sided cable attaches to the earcup, and an included clasp keeps the cable securely in place

Rotating earcups allow for easy single-ear monitoring

Replaceable leatherette earpads extend the life of the headphones

Sturdy, lightweight construction

Includes a 3.5mm to 1/4" adapter

Zoom TPS-4 Tabletop Tripod Mic Stand

The Zoom TPS-4 is a tripod mic stand offering a compact and lightweight solution for positioning your favorite microphone on a table or desk. Its universal 5/8"-27 thread is made of metal to ensure durability while accommodating most mic clips, shockmounts, and integral mic threads. The height of the TPS-4 can be adjusted from 3.85 to 5" via a simple twist clutch for optimal placement.

Zoom ZDM-1 Dynamic Microphone Specs

Microphone
  • Form Factor

    Stand/Boom Mount

  • Sound Field

    Mono

  • Operating Principle

    Pressure Gradient

  • Capsule

    1 x Dynamic

  • Polar Pattern

    Supercardioid

  • Orientation

    End Address

  • Circuitry

    Solid-State

  • Pad

    None

  • High-Pass Filter

    None

  • Tone Adjustment

    None

  • Indicators

    None

  • On-Board Controls

    None

  • Windscreen

    Foam (Included)

  • Performance

     

  • Frequency Range

    50 Hz to 18 kHz

  • Maximum SPL

    135 dB SPL

  • Impedance

    200 Ohms

  • Load Impedance

    200 Ohms (Minimum)

  • Sensitivity

    -54 dBV/Pa

  • Connectivity

     

  • Output Connectors (Analog)

    1 x XLR 3-Pin Male

  • Headphone Connector

    None

  • Physical

     

  • Color

    Black

  • Mounting

    3/8"-16 Female, 5/8"-27 Female (with Included Hardware)

  • Construction Material

    Metal

  • Dimensions

    ø: 2.12 x L: 5.19" / ø: 5.38 x L: 13.18 cm

  • Weight

    14.11 oz / 400 g

  • Packaging Info

     

  • Package Weight

    1.31 lb

  • Box Dimensions (LxWxH)

    8.4 x 5.1 x 3.5"

  • Zoom ZHP-1 Over-Ear, Closed-Back Headphones Specs

     

  • Headphone

     

  • Earpiece Design

    Over-Ear (Circumaural), Closed-Back

  • Earpiece Connection / Wearing Style

    Headband

  • Foldable

    No

  • Driver Type

    Dynamic

  • Driver Size

    1.57" / 40 mm

  • Magnet Type

    Neodymium

  • Impedance

    68 Ohms

  • Active Noise Cancellation

    No

  • Contact Pressure

    4.5 N

  • Performance

     

  • Frequency Response

    10 Hz to 20 kHz

  • Sensitivity

    102 dB SPL at 1 kHz / 1 mW

  • Maximum Power Handling

    200 mW

  • Wired Connectivity

     

  • Audio Connector to Source

    1 x 1/8" / 3.5 mm TRS Male Straight

  • Adapter (Included)

    1/4" TRS

  • Cable Design

    Single-Sided, Detachable

  • Audio Connector to Earpiece

    1 x 1/8" / 3.5 mm Male

  • Cable Length

    9.84' / 3 m

  • Cable Color

    Black

  • Physical

     

  • Water Resistance

    None

  • Material of Construction

    Leatherette

  • Weight

    6.7 oz / 190 g

  • Zoom TPS-4 Tabletop Tripod Mic Stand Specs

     

  • Stand

     

  • Height

    3.85 to 5" / 9.78 to 12.70 cm

  • Base Type

    Tripod

  • Adjustment Type

    Twist Clutch

  • General

     

  • Mounting Thread

    5/8"-27 Male

  • Finish

    Black

  • Zoom ZDM-1 Dynamic Microphone
  • Custom ZDM-1 Windscreen
  • Pivoting Mic Stand Mount
  • Threaded European Mic Stand Adapter
  • Zoom ZHP-1 Over-Ear, Closed-Back Headphones
  • 3.5mm TRS Headphone Cable (9.8')
  • 3.5mm to 1/4" Adapter
  • Cable Clasp
  • Zoom TPS-4 Tabletop Tripod Mic Stand
  • XLR Microphone Cable (9.9')
  • Limited 1-Year Warranty

RECENTLY VIEWED PRODUCTS

-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56

TOP

 

img

Added to cart successfully!