Tiltaing Z CAM E2-S6/F6 Kit C (Tilta Gray)

Tiltaing Z CAM E2-S6/F6 Kit C (Tilta Gray)

RECOMMENDED ACCESSORIES

Tilta TA-T07-C-G Overview

Use the Tiltaing Z CAM E2-S6/F6 Kit C from Tilta to protect, provide fingertip focus control and extended battery power, and add accessory mounts to your Z CAM E2-S6 or E2-F6 camera. This Tilta Gray kit includes a full camera cage, the side focus handle type II, a 15mm LWS baseplate, a quick release top handle, a Samsung T5 SSD holder, both Arca-Swiss and Manfrotto-style quick release plates, a side rod bracket, two 7.8" 15mm rods, and several cables.

Note:

Not compatible with Z CAM E2, E2C, or E2G model cameras.

Tilta Full Camera Cage for Z CAM E2-S6/F6 (Tilta Gray)

The Tilta Gray Full Camera Cage for Z CAM E2-S6/F6 from Tilta protects your camera while providing a variety of accessory mounting options. This dedicated cage also incorporates two ARRI-style rosettes for attaching handgrips or other components. This cage is compatible with Z CAM E2-S6 and E2-F6 camera bodies.

Constructed from an aluminum alloy and stainless steel, the Tilta Z CAM E2-S6/F6 cage incorporates multiple 1/4"-20, 3/8"-16, and ARRI-style anti-twist threads and one cold shoe mount. Access to the camera's controls and ports is maintained when the cage is mounted on your camera, and the base incorporates several tripod/gimbal mounting holes.

Note:

Not compatible with Z CAM E2, E2C, or E2G model cameras.

Compatibility

Z CAM E2-S6 and E2-F6 cameras

Tilta Quick Release Top Handle for BMPCC 4K Cage (Tilta Gray)

Carry and stabilize your Blackmagic Design Pocket Cinema Camera 4K with this lightweight Tilta gray Quick Release Top Handle from Tilta. The quick release handle's features include two shoe mounts, a 15mm rod port, multiple 1/4"-20 and 3/8"-16 threads, and a 3/8"-16 thread with locating pins.

The aluminum and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is one 3/8"-16 thread with locating pins on the front of the handle to mount a separately available Tilta cage rod mount.

Tilta Samsung T5 SSD Holder for BMPCC 4K Cages (Tilta Gray)

Add a solid state drive to your Blackmagic Design Pocket Cine Camera 4K with this Tilta gray Samsung T5 SSD Holder from Tilta. The aluminum and stainless steel holder is designed to snugly fit the Samsung T5 SSD, which is secured with a thumbscrew. The holder attaches to the cage with the included screws, and there are screws included to attach the separately available partial sun hood to protect your LCD monitor from sunlight and glare.

Compatibility

Samsung T5 SSD
Tilta Camera Cage for Blackmagic Pocket Camera 4K

Tilta Quick Release Plate for Tiltaing Camera Cages (Arca-Swiss Compatible)

Custom build your Tiltaing camera rig with the Arca-Swiss compatible Quick Release Plate from Tilta. With this plate attached directly to the bottom of your compatible Tiltaing camera cage, you will be able to quickly and easily mount and remove the cage from an Arca-Swiss support system.

Note:

This quick release plate is not compatible with the Tiltaing BMPCC 4K/6K cage.

Tilta Quick Release Plate for Tiltaing Camera Cages (Manfrotto Compatible)

Custom build your Tiltaing camera rig with the Manfrotto compatible Quick Release Plate from Tilta. With this plate attached directly to the bottom of your compatible Tiltaing camera cage, you will be able to quickly and easily mount and remove the cage from a Manfrotto support system.

Note:

This quick release plate is not compatible with the Tiltaing BMPCC 4K/6K cage.

Tilta Nucleus-Nano Run/Stop Cable for Sony FS7/FS5, URSA, EVA1, Z CAM Cameras

Use this Nucleus-Nano Run/Stop Cable from Tilta to connect your Sony FS7/FS5, Blackmagic Design URSA, Panasonic EVA1, or Z CAM camera to the control port of the Nucleus-Nano motor to control run/stop operation. The cable has a right-angle Nucleus-Nano control connector on one end, and a right-angle LANC connector on the camera end.

Note:

The run/stop cables Tilta offers for their wooden handles ARE NOT compatible with the Nucleus-Nano since the engineering and pin configurations are completely different. The wooden handle R/S cables are not safe to use with the Nucleus-M or Nucleus-Nano. Only use cables that have been developed by Tilta exclusively for the Nucleus-Nano system.

Tilta 12V Micro DC Male to Z CAM Power Cable

The 12V Micro DC Male to Z CAM Power Cable from Tilta enables you to power your Z CAM E2 camera using an external battery mounted on select Tiltaing side handles.

This cable has a micro DC male connector on one end and a 3-pin LEMO-type connector on the other.

Tilta 90° USB Type-C Cable for Z CAM E2

The 8" 90° USB Type-C Cable for Z CAM E2 from Tilta is designed to specifically for the Tiltaing Z CAM E2 camera cage. Incorporating two right-angle USB Type-C connectors, this cable is designed to hang flat against the cage and features thumbscrew anchors on each end.

Tilta 15mm Single Rod Holder for Camera Cage Side (Tilta Gray)

Add an accessory to the side of your Tilta full or half cage with this 15mm Single Rod Holder. The aluminum and stainless steel holder attaches to the side of the cage using the included thumbscrew and holds a single, separately available 15mm rod to add additional accessories to your rig.

Tilta 15mm LWS Baseplate Type I (Tilta Gray)

Featuring a Tilta gray finish, the Tiltaing 15mm LWS Baseplate Type I is designed to work with the Tiltaing half and full cages for the BMPCC 4K/6K and Z Cam. The baseplate features integrated 15mm LWS rod clamps with spring-loaded locking levers that allow you to lock or loosen the clamps, even when you can't rotate the levers a full 360°. The bottom of the baseplate is compatible with standard Tilta dovetails.

Works with Tiltaing full and half camera cages for BMPCC 4K/6K and Z Cam. It is also compatible with Tiltaing full camera cages for Sharp 8K, Panasonic GH5, Fuji XT3, Nikon Z7, and Sony a6/a7/a9 cameras.

The Tilta gray finish is a uniform gray color.

Tilta Single 15mm Aluminum Rod (7.87", Anodized Black)

This Tilta Single 15mm Aluminum Rod is 7.87" in length and anodized black. It is compatible with 15mm LWS and studio rod support clamps and chamfered to make it easier to slide rod-mounted accessories onto the end.

RECENTLY VIEWED PRODUCTS

-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56
-21%
Rated 5.00 out of 5
( 1 review )

Example Product

$328.28 $259.56

TOP

 

img

Added to cart successfully!