FeiyuTech AK2000/4000/4500 Gimbals Hyperlink Remote Control

Feiyu Hyperlink Overview

Use the Hyperlink Remote Control from Feiyutech to remotely control the basic functions of your AK2000, 4000, or 4500 series gimbal. The remote is constructed with durable aluminum and covered with a comfortable silica coating to make handling easier, and it features an LCD status display. The controller runs on a single 18650 lithium-ion battery with a 3.7V, 8.1Wh, 2200mAh capacity and lasts approximately 18 hours.

The Hyperlink remote connects to your AK2000, 4000, or 4500 series gimbal using Bluetooth 4.1 and allows you to control multiple functions. With the multifunction knob and the joystick, you can control the up, down, left, and right motion of the camera as well as control leveling, pan follow, pan and tilt follow, and lock modes. It also features a function button to control basic menu configuration and a shutter/record button that allows you to snap stills or record video.

A USB charging cable, an 18650 battery, a smartphone clamp that fits phones 2.2 to 3.3" wide, and a 1/4"-20 adapter are all included.

Key Features

• Control Feiyutech AK2000/4000/4500 gimbals remotely

• Multifunction knob

• LCD display

• Bluetooth 4.1 connectivity with 32.8 to 49.2' range

• Smartphone holder

• Constructed with durable aluminum and silica

• Approximately 18 hours of battery life with one 18650 3.7V, 2200mAh, 8.1Wh battery

• Battery charges with USB Type-C cable in approximately two hours

Modes

Pan Follow Mode (HF)

The roll and tilt direction are fixed and the camera moves according to the left-right movements of user's hand

Pan and Tilt Follow Mode (TF)

The roll direction is fixed and the camera moves according to the left-right movements or up-down movements of user's hand

Lock Mode (LK)

The orientation of the camera is fixed

All Follow Mode (AF)

All three axes of the gimbal follow the movements of the user's hand

Function Button

Long press: power on/off
Single tap: switch to LK; single tap again to go back to HF
Double tap: switch to TF; single tap to switch to HF in this mode
Triple tap: switch to AF; single tap to switch to HF in this mode

Shutter Button

When the remote controller is connected with the gimbal successfully, single tap the shutter button to capture, or long-press the shutter button for the camera to record

Settings Button

Single tap this button to find the settings menu, device information, Bluetooth connect/disconnect, gyroscope calibration, knob-sensitivity adjustment

Trigger Button

Long-press-and-hold: switch to motion-sense mode when remote controller connects to gimbal, release this button to exit 
Double tap: reset gimbal, three axes return to initial level, and gimbal works in HF Mode

Multifunction Knob

Long-press the multifunction knob to switch to the control of external devices connect with gimbal (this function is not available to the Built-in Zoom/follow focus feature of camera)
Single tap the multifunction knob to switch the control of three axes

Leveling Control Button

Move this button left or right to adjust roll axis movements when the controller connects to gimbal (this function is not available for the AK2000/AK4000)

Joystick

Use the joystick to navigate the configuration menus or move the camera up, right, left, or down